The PSL 5.0 Pump and Lift Station Level Controller is an ultrasonic level sensor that mounts above the liquid surface for accurate and reliable non-contacting level measurement. The PSL 5.0 is ideal for sewage pump stations, lift stations, wet wells, and tank level measurements. The unit includes six independently programmable control relays for pump or valve control, level alarms, dialers, temperature alarm, and echo loss alarms.
The easy-to-use simple menu system and built-in keypad can be used to program application parameters such as measurement ranges, relay set points, and pump alternation sequences. The PSL 5.0 also includes the ability to connect a submersible pressure sensor, or any other 4-20mA level sensor, for fail-safe hybrid sensing. Perfect for wastewater control, sump control, wet well level monitoring, and industrial applications where backup measurement sensors are required.
To find out more about the PSL 5.0, contact one of our friendly sales team today.
- Low Cost
- Isolated 4-20mA Output (1000 ohm)
- Large LCD Display
- Programmable Signal Relay
- Non-Contacting Ultrasonic Sensor or Optional Pressure Sensor
- Built-in 2-Key Calibrator
- Watertight, Dust-tight Enclosure
| General Specifications | |
|---|---|
| Spec name: | Description: |
| Electronics Enclosure | NEMA4X (IP 66) polycarbonate with clear, shatterproof cover |
| Accuracy | ±0.25% of range or 2 mm (0.08 in), whichever is greater |
| Display | white, backlit matrix - displays calibration menu, relay status, runtime reports, and sensor status |
| Calibration | Level or Range mode in selectable units |
| Programming | Built-in 5-button keypad, password protected |
| Power Input | 100-240 V AC 50/60 Hz, 2.4-5.6 W depending on options |
| Outputs | Isolated 4-20mA, 1000 ohm |
| Control Relays | 6 form 'C' dry contact relays rated 5 A SPDT; programmable level alarm and/or pump control modes, pump alternation/sequencing, failsafe/echo-loss, air temperature alarm |
| Surge Protection | AC power, 4-20mA, and ultrasonic sensor |
| Operating Temperature (Electronics) | -20 °C to 60 °C (-5 °F to 140 °F ) |
| PZ34 Sensor Specifications | |
|---|---|
| Spec name: | Description: |
| Maximum Range | 10 m (32 ft) - optional sensors for longer ranges |
| Deadband (Blanking) | Programmable, Minimum 406 mm (16 in) |
| Beam angle | 8° Locate 300 mm (1 ft) from wetwell sidewall for every 3 m (10 ft) depth |
| Operating Frequency | 46 KHz |
| Exposed Materials | PVC |
| Operating Temperature | -40 °C to 65 °C (-40 °F to 150 °F) |
| Operating Pressure | 0 bar to 1.35 bar (0 psi to 20 psi) maximum |
| Sensor Cable | RG62AU coaxial, 7.6 m (25 ft) standard length |
| Options | |
|---|---|
| Options: | Description: |
| Sensors | Long and short-range models, all Teflon construction, Intrinsically safe, pressure |
| Hazardous Locations | Intrinsic safety barrier for ultrasonic sensor mounting in hazardous areas. NEMA7 explosion-proof enclosure for electronics mounting in hazardous locations. |
| Sensor Cable | 15 m (50 ft) or 30 m (100 ft) RG62AU coaxial continuous from the ultrasonic sensor - or splice up to a total of 150 m (500 ft) length |
| Sensor Cable Junction Box | Watertight NEMA4 steel with terminal connection strip |
| Power Input | 9-32 V DC, 2.1-4.95 W depending on options |
| Data Logger | 20 million point Data Logger with output to USB flash drive. Windows software. |
| Enclosure Heater | Thermostatically controlled - recommended for temperatures below 0 °C (32 °F) |
| Enclosure Panel Mount | Flange and bracket assembly mounts enclosure in panel face |
| End-to-end solutions for wastewater treatment plant | Download |
| Product Brochure | Download |
| Datasheet | Download |
| Order Form | Download |
| Installation & Instruction Manual | Download |
| Pulsar Logger v3.0.0 Software (Formerly Greyline Logger) | Download |
| Software Brochure | Download |
| North America Electrical Safety Certificate | Download |
| North America Haz Loc Certificate | Download |
| Datasheet | Download |
| SBMS Submergence Shield Datasheet | Download |
| Datasheet | Download |
| Datasheet | Download |
| Datasheet | Download |
| Datasheet | Download |
| Datasheet | Download |
| Pulsar Measurement Product Warranty | Download |
- FM/CSA Class1, Div1
- FM/CSA Class 1, Div 2
- CSA/UL EN61010-1
- CE
Enclosure
- NEMA4X (IP 66)
- Optional: Intrinsic safety barrier for ultrasonic sensor mounting in hazardous areas. NEMA7 explosion-proof enclosure for electronics mounting in hazardous locations.
PZ Sensor
- Class I, Div 2, Groups A, B, C, D
- Class I, Div 1, Groups C, D; Class II, Groups E, F, G; Class III; Encl. Type 4
Request a Quote
Quick form, fast quote — within 1 business day.
Product Configurator
The Pulsar Measurement product configurator allows you to select the applications specific to you and discover the most appropriate solutions for your requirements.
