Full level measurement commissioning and service solution.
Whether measuring liquids, solids, chemicals, or slurries, Pulsar Measurement's expert team of engineers can commission any installed Pulsar Measurement level measurement system and sensor(s), giving peace of mind that the measurement system settings will be tailored to the application to provide the most reliable and accurate level measurement possible. The commissioning checklist for level solutions includes the following:
Information Gathering
Material being measured
Application/Vessel dimensions
Expected maximum/fill empty rate
Required outputs
Display requirements
Maximum and minimum level
Output mode/Range/Fault indication
Process information/phases/turbulence/foam/cleaning/temperatures
Inspection of Installation
Electrical connections
Junction boxes
Visual check for cable damage
Sensor location and suitability
Application dimensions
Sensor Mounting Check
Location
Aiming
Fastening
Parameter Setup
Application parameters
Damping
Trim mA loop to input device if high accuracy is required
Observe Operation
Check and record echo traces throughout the complete process cycle where practicable
Service Parameter Adjustment
Adjust measurement reliability parameters to suit any potential concerns
Finalize Commissioning
Save diagnostic data and parameter settings
Take photos of the installation (with authorisation)
Generate commissioning report where requested including copies of instrument settings as commissioned including any observations and recommendations.
Our on-site level solutions are only available for our UK customers, for customers requiring on-site level measurement support outside of the UK, contact your local Pulsar Measurement partner.